Inverted Metallurgical Microscope
ECLIPSE MA200
Inverted Metallurgical Microscope
ECLIPSE MA100N
More Information
More Information
Inverted Metallurgical Microscope
ECLIPSE MA200
Inverted Metallurgical Microscope
ECLIPSE MA100N
More Information
More Information

Spectro Q5800
Portable Oil Lab

The Spectro Q5800 is a rugged, portable expeditionary fluid analysis system that gives operators in the field the ability to perform comprehensive, mobile lubricant sampling. The battery-powered device enables complete lubricant assessment for condition monitoring and rapid results that permit informed maintenance decisions. It takes only 3 ml of oil to perform a comprehensive oil analysis and no chemicals or solvents are needed for sample preparation or cleaning. The complete analysis, with all four tests, only takes about 5 – 7 minutes, depending on oil viscosity.

The Q5800 includes four oil analysis technologies into a case weighing only 15kg and powered by Li-Ion battery so a comprehensive oil analysis can be conducted in the field wherever the asset is located. The four technologies are:
  1. Energy Division (ED) XRF for elemental analysis of 13 elements for particles larger than 5 microns. They are Al, Si, Cr, Fe, Ni, Pb, Cu, Sn, Mo, Ag, Zn, and V, common wear metals
  2. Infrared spectroscopy based on patented FluidScan ® direct infrared spectroscopy with the fliptop cell for simple sample introduction. The IR produces oil properties such as Oxidation, Nitration, Sulfation, TBN and/or TAN, anti-wear additive depletion, and contamination such as water, soot, and glycol.
  3. Viscometer based on patented split cell design used in SpectroVisc 3000 Series. It measures kinematic viscosity at 40C.
  4. Pore blockage particle counter that measures particle count for larger than 4 microns. ISO code is also reported.

A filtergram coupon is used for the pore blockage particle counter; the remaining particles on the filter are scanned by XRF for elemental analysis. In the meantime, viscosity and IR tests are performed simultaneously to speed test results.

A Li-Ion battery provides enough power for up to 4 hours of continuous operation. An on board computer with a touch screen controls all the hardware, as well as the asset and reference fluid database and alarm limits for immediate oil analysis report. Data can be synchronized to a PC via a USB using Fluid Manager software.
Key Features
  • Tests all types of lubricating fluids and asset compartments
  • Instant results for faster decision-making
  • Rugged design for on-site, field-based use
  • Easy to transport
  • Precisely detects potential failures before they happen
  • Touch screen interface
  • Battery operated with WIFI and Bluetooth
  • Integrated software for detailed fluid analysis
  • Includes a backpack for device and accessories

Specs & Applications
Application: Mineral and synthetic lubricants including gear, engine, transmission, hydraulic, turbine as well as military, marine and mining applications
Operating mode: Single test or multi-parameter analysis
Output: Elemental (ppm): Si, Al, Cr, Ti, Fe, Ni. Pb. Cu, Sn
Fluid chemistry: TAN & TBN, Oxidation, Nitration, Sulfation, Water, Glycol, Scoot, Incorrect Fluid, Antioxidant Depletion
Viscosity: Kinematic viscosity at 40°C(cSt)
Particle count: Particles > 4µm/ml on filtergram
Methodology: ASTM D7889, Mod ASTM D7279 (visc)