Inverted Metallurgical Microscope
ECLIPSE MA200
Inverted Metallurgical Microscope
ECLIPSE MA100N
More Information
More Information
Inverted Metallurgical Microscope
ECLIPSE MA200
Inverted Metallurgical Microscope
ECLIPSE MA100N
More Information
More Information

Electric Fusion Fluxer
X-300 

The X-300 fluxer is the new reference for electric fusion in today's complex, busy lab environment. Thanks to a clever electric furnace design, this unit can be ordered as a 1, 2 or 3 position fluxer, which can be expanded up to 3 positions at a later time, in the field. Indeed, everything is pre-wired for 3 positions, so increasing capacity is just a matter of adding mechanical components and re-configuring the furnace insulation walls. Borrowing the robust concept of its bigger brother (the six-position X-600), the X-300 also boasts revolutionary heating elements that are resistant to flux and chemical attacks. Heating elements can be changed individually, and will not become brittle.

The furnace heats up to the required temperature in less than 15 minutes in the morning, and will then remain ready for quick startup of a new batch of XRF beads or ICP solutions (with optional solution stirrer module). Automatic active power monitoring in the furnace achieves extraordinary temperature stability from one run to the next, and across all crucibles in the furnace.

The X-300 is pre-loaded with various fusion methods that can be used as is, or can be customized. All fusion methods can be saved, renamed, deleted or copied, just like computer files. Only the preset methods are protected to avoid accidental overwriting.
Upon turning the instrument on, the furnace door opens, the platinumware holders move forward and out of the furnace, and the door closes.

Up to three (3) platinum crucibles are loaded with a few grams of powdered sample, an appropriate flux and often other agents. The crucibles are inserted into the crucible holder. Platinum molds are then installed onto the mold holder, and the safety shield can be closed. Since the platinumware holders are made of ceramics, there is no risk of contamination during the fusion. When the user instructs the X-300 to launch the actual fusion, the safety shield locks, and then the oven door automatically opens, the platinumware holders enter the oven, the door closes and all heating steps are automatically started in sequence. Temperature is constantly monitored and displayed. An ambient LED lighting system switches to the color red.

The side-to-side rocking of the crucible holder continuously mixes the flux with the sample. When the flux melts, it starts dissolving the sample. When all sample is dissolved, the oven door opens, the platinumware holders move forward and, during the time the door closes, the crucibles are tilted to the right to empty their contents into the molds.

Blowers located underneath cool the molds, while the oven remains powered, to gain time in the next cycle. When the molds are completely cooled, the ambient LED lighting system changes from red to blue, and the user is informed that he or she can now pick up perfectly homogenous glass beads, ready for analysis by XRF. For solution preparation, the hot melt is poured into unbreakable beakers (instead of molds), which contains an acid stirred by an optional magnetic system.

Key Benefits
  • Impervious to flux and other chemical projections
  • Robust and non-brittle (instrument can be moved without element damage)
  • Dynamic Temperature Profile (DTP) to ensure uniform temperature (patent pending)
  • Individual element automatic power compensation (patent pending)
  • Fast heat-up (<15 minutes)
  • Can prepare glass disks (beads) for XRF, or solutions for ICP, including preparations in peroxide or pyrosulfate
  • Throughput of up to 15 samples/hour
  • Entirely automated, cold-to-cold
  • Fully reproducible fusion methods
Specifications
  • Voltage: 195-250 VAC (50-60 Hz)
  • Power (max): 3000 W
  • Temperature: 50-1200°C
  • Height: 51 cm [20"]
  • Width: 48 cm [19"]
  • Depth: 63 cm [25"]
  • Mass: 45 kg [99 lbs]
Please contact us for more information