Automated Micro Carbon Residue Tester acr-m3mk2 automates the vaporizing / coking process of Micro carbon residue test, the result of which has been found well correlated with conventional Conradson method’s.
Furthermore, due to its more consistent process, it yields better precision. This second generation model has been further improved for its ease of use and test throughput.
SMALL SAMPLE: Test can be run with a small quantity of sample (0.15 to 1.5g for small vials, 3.0g for medium vials and 5.0g for large vials, depending on carbon residue content).
EASY OPERATION: Test automatically proceeds exactly as prescribed by simply pushing the START switch. Pressure controller (2nd stage regulator) and solenoid valve supply constant pressure. No fine tuning is required after test starts. The buzzer sounds intermittently for 10 seconds when the process is finished.
EQUIPPED WITH GAS FLOW METER: With the N2Gas flow meter and needle valve fitted on the front panel, process parameters can be easily checked and calibrated.
VINYL LAMINATED TRAP: The condensate trap is equipped on the front of the tester. Thanks to this, the condensate volume is easy to confirm and the trap easily attaches and detaches. Trap jar is vinyl laminated for the safety.
Repeatability and reproducibility are excellent. Since the electronic temperature control is far more precise compared to that of Conradson method’s.
|Test Methods||ISO 10370, ASTM D4530, etc.|
|Range||Up to 500°C|
|N2 gas flow rate||Automatically regulated, and displayed on the front panel|
|Size (W x D x H)||350 × 390 × 460 mm|
|Power Consumption||AC 100 to 120 V 1,500 VA (max) 50 / 60Hz|
AC 220 to 240 V 1,500 VA (max) 50 / 60Hz