Description
VOXLS 20 Series X-ray CT Systems
The VOXLS 20 Series provides X-ray and computed tomography (CT) inspection for industrial components. The system supports non-destructive inspection of internal structures, defects and dimensional features without sectioning the sample.
In addition, the platform combines a compact footprint with a metrology-grade mechanical structure. As a result, manufacturers can use the system in quality laboratories, production environments and research facilities.
VOXLS 20 Series for Non-Destructive Inspection
The VOXLS 20 Series supports X-ray and CT inspection across a wide range of industrial applications. The system provides access to internal component features that conventional surface inspection cannot reveal.
For example, users can examine internal voids, inclusions, assemblies and other structures without cutting the component.
Nikon developed the platform with a granite base, rigid steel manipulator towers and high-accuracy encoders and motors. These features support stable and repeatable CT data acquisition. The VOXLS 20 C 225 provides an inspection volume of 555 mm in diameter × 759 mm in height.
For more information about QES inspection and measurement solutions, visit QES Inspection, Test & Measurement Equipment.
Flexible CT Scanning Technologies
The system supports several CT scanning techniques. Therefore, users can select a scanning method according to the component geometry and inspection requirement.
Available techniques include:
- X.Tend Helical CT
- Offset.CT
- Panel Shift CT
- Tilted CT
- Scatter Correction CT
- AI Reconstruction
- Limited Angle CT
These options help address different sample sizes, geometries and material combinations.
Dual-Source Configuration
The VOXLS 20 C 225 uses a motorised dual-source configuration. It combines a 225 kV reflection target with a 160 kV transmission target.
The reflection target provides higher X-ray flux for productivity. Meanwhile, the transmission target supports high-resolution imaging. Users can select the appropriate source according to the inspection application.
Metrology-Grade Mechanical Platform
The system uses a granite base and rigid steel manipulator towers. High-accuracy encoders and motors further support precise positioning.
As a result, the platform provides the mechanical stability required for repeatable X-ray and CT inspection.
The VOXLS 20 C 225 supports a maximum central sample load of 30 kg. Nikon also specifies a compact footprint for the system, which supports installation in a range of quality laboratory and production environments.
CT Inspection for Different Applications
The VOXLS 20 Series supports applications across several manufacturing and engineering sectors.
Typical applications include:
- Automotive component inspection
- Electronics inspection
- Battery inspection
- Aerospace component inspection
- Additive manufacturing
- Casting inspection
- Research and development
- Production quality control
- Failure analysis
For example, engineers can use CT data to examine internal structures without destroying the component. This approach supports both development work and production quality investigations.
VOXLS 20 Series Specifications
| Specification | Details |
|---|---|
| X-ray source | Up to 225 kV |
| Dual-source configuration | 225 kV reflection / 160 kV transmission |
| Inspection volume | Up to 555 mm diameter × 759 mm height |
| Maximum sample load | 30 kg central load |
| CT capabilities | Multiple CT scanning techniques |
| Platform | Metrology-grade mechanical platform |
Specifications can vary according to the selected system configuration. Therefore, users should confirm the required configuration with QES before specifying the system.
For the manufacturer’s latest information, refer to the official Nikon VOXLS 20 Series product page.
